|
|
Width: 39cm / 15.6"
Depth (front to back): 22cm / 8.8"
Height: 106cm / 42.4"
Weight: 9 KG
106cm Tall Stainless Steel Water Feature
Pump & 10 metres of cable
Full instructions
UK Mainland Delivery
A bit about the fountain...
This stainless steel unit is self contained and offers a modern sleek designer look to any space.
This convex curve fountain is minimalist and sleek with water flowing from a hidden slot in the top and runs down the face of the feature and under the overhang. Pebbles (Not Included) can be added to the collection tray to add further interest.
To make your life easier this feature comes complete in a box with very little assembly required. Just 5 minutes to set up, plug in, add water and you're ready to go.
Caring for your water feature :
Fill the fountain with sufficient water to ensure the pump is well submersed. We advise that you clean and top up the water on a regular basis.
Adding Algae Stopper to the fountain will avoid the build-up of algae and keep the water clean and clear. Algae Stopper can be added to your shopping basket as an accessory.
To clean the fountain we advise using Fountain Grime and Lime Cleaner & Stainless Steel Cleaning Cloths, These accessories can also be added to your basket.
Always shut off the power before cleaning and maintaining the pump. Never allow the fountain pump to run dry.
It is not recommended to leave the fountain running constantly. We suggest turning the fountain on/off when required.
Preparing your water feature for the Winter :
During the winter never allow ice to form in the water feature. Drain and clean all bowls etc. and apply a Fountain Protection Cover (This can be added to your shopping basket) or for total protection and prolong the life of the stainless steel, drain the fountain and store indoors.
The pump should be disconnected from the mains supply, removed from the fountain and cleaned by following the instructions which come with each fountain.
Sorry there are currently no reviews for this product yet
Watch and listen as three angelic cherubs pour water down this charming feature and into the glowing rock pool below, lit by a fully submersible low voltage light.
Watch and listen as water is pumped from this traditional looking pump into the wooden effect trough below which is lit by a low voltage submersible light.
Protect your cast stone water feature during harsh winter frosts with this high quality large Henri Studio fountain protection cover.
Water pours from the tap at the top of the fence and pours into the two buckets below.
This open tree trunk style water feature has a quirky appearance and would add a unique touch to any garden!
A stone effect lion head wall hanging water fountain to create a focal point in your garden.