A bit about this water feature...
The Venetian Sphere is one of our more unusual water features with the added interest of a spinning glass ball which sits on top of the flowing water. The glass is lit from underneath by a set of cluster LED lights.
The water runs down the ripple effect front before pouring into the self-contained sump. The water feature is constructed from polyresin, it's easy to install and will work equally well indoors as it does outdoors.
Caring for your water feature...
Fill the fountain with sufficient water to ensure the pump is well submerged. We advise that you clean and top up the water on a regular basis.
Adding an algae prevention treatment to the fountain will avoid the build-up of algae and keep the water clean and clear. This can be added to your shopping basket as an accessory.
Always shut off the power before cleaning and maintaining the pump. Never allow the fountain pump to run dry.
It is not recommended to leave the fountain running constantly. We suggest turning the fountain on/off when required.
Preparing your water feature for the Winter...
During the winter never allow ice to form in the bowls as the force of the ice forming will crack the bowls. Drain and clean all bowls etc. and apply a Fountain Protection Cover (This can be added to your shopping basket) or for total protection and prolong the life of the paint finish, drain the fountain and store indoors.
The pump should be disconnected from the mains supply, removed from the fountain and cleaned by following the instructions which come with each fountain.
Height: 59cm / 23.2"
Width: 33.5cm / 13.2"
Depth: 23cm / 9.1"
Venetian Sphere (with spinning glass ball)
Solid glass sphere
1 set of cluster LED lights
Water pump & 10m cable (with shared lights and pump transformer)
|Indoor / Outdoor Use||Indoor & Outdoor Use|
|Are Lights Included?||Yes, 1 x 9 Colour Changing LED Cluster|
|Power||Low Voltage Transformer|
|Flow Rate||450 LPH|