How to connect the pump and lights on a Water Feature

How to connect the pump and lights on a Water Feature

1. Take the transformer and insert the pump cable into the transformer 
   
   
   
   
2. If the Feature has lights connect the light too. 
   
   
   
3. Then connect the clear tubing to the pump outlet. Top tip pop the PVC tube in warm water if it’s hard to get on! 
   
   
   
   
4. Ensure the pump is placed back inside the feature and fully submerged in water. Do not worry about the pump being attached to the floor of the feature, let the pump just float around freely in the water.
   
   
5. Ensure that all connections are fully water tight.
   
   
6. Then simply plug in at the wall and enjoy.

 We always recommended keeping transformers either indoors or inside a weatherproof box, this will prolong the life of the transformer.

Click here to continue shopping our range of water feature pumps.